Skip to main content
ELECTRIC ALL PRO Electrician
Completed Project

Whole House Surge Protection
Downtown Raleigh, NC

We installed a Type 2 surge protective device at the main panel on a dedicated breaker, verified the grounding electrode system, and registered the connected-equipment warranty — whole-home defense against storm and utility surges.

SPD at main panel — Whole House Surge Protection — Downtown Raleigh, NC
Type 2 SPDPanel-Mounted
Every CircuitProtected
November 2025Completed
DowntownCondo Renovation
Request a Similar Upgrade Call (919) 670-4005

Project Snapshot

ServiceWhole House Surge Protection
LocationRaleigh, NC
Downtown 27601
PropertyRenovated Residence
Downtown Raleigh
ScopeType 2 SPD Install
Grounding Verification & Warranty
Permit & InspectionCity of Raleigh
Permit & Final Inspection Passed
CompletedNovember
2025
Project Overview

Project Overview

After a nearby lightning strike took out a neighbor’s electronics, this downtown Raleigh homeowner wanted real protection for a home full of new appliances, computers, and A/V equipment — more than plug-in power strips could ever provide.

We installed a listed Type 2 surge protective device directly at the main panel on a dedicated breaker with minimal lead length, verified and tightened the grounding electrode system it depends on, and registered the manufacturer’s connected-equipment warranty—clamping surges at the service entrance before they reach a single outlet.

Problem

No whole-home surge protection — only power strips guarding a home full of electronics.

Solution

Type 2 SPD at the panel on a dedicated breaker, with verified grounding and short leads.

Result

Every circuit protected against utility spikes and storm transients, 24/7.

Project Story

SPD photo — Whole House Surge Protection — Downtown Raleigh, NC
Home TypeSingle-Family Home
Original ProtectionPower Strips Only
Upgraded ProtectionType 2 SPD, Whole-Home
Inspection StatusFinal Inspection Passed
OutcomeEvery circuit protected
Scope of Work

What We Installed and Verified

We added panel-level surge defense and verified the grounding it depends on, protecting every circuit in the home from voltage spikes.

Whole-Home DefenseClamped at the service entrance
Improved SafetyNew equipment and protections
Built to CodePermit pulled and inspection passed
SPD installed beside breakers with short leads — Whole House Surge Protection — Downtown Raleigh, NC

Work Included

Installed listed Type 2 surge protective device at the main panel
Installed dedicated two-pole breaker for the SPD
Kept SPD lead length to a minimum for clamping performance
Verified and tightened the grounding electrode system
Checked bonding at water pipe and intersystem terminals
Torque-checked panel connections while inside the panel
Labeled the SPD breaker and updated the panel directory
Registered the connected-equipment warranty for the homeowner

All work completed to meet NEC and local code requirements

Equipment Upgraded

Siemens 200A panel photo — Whole House Surge Protection — Downtown Raleigh, NC Type 2 SPDListed surge protective device rated for repeat storm events.
meter base photo — Whole House Surge Protection — Downtown Raleigh, NC Dedicated BreakerTwo-pole breaker feeding the SPD at the top of the panel.
service drop conductors photo — Whole House Surge Protection — Downtown Raleigh, NC Grounding SystemVerified electrodes and bonding — the path every surge discharges to.
basement subpanel photo — Whole House Surge Protection — Downtown Raleigh, NC Status IndicatorsProtection-health lights the homeowner can check after storms.
Project Execution

Our Work Process

A safe, code-compliant installation requires more than just equipment. Here’s how we executed this surge protection install from start to finish.

Safety FirstEvery step follows NEC standards
Code CompliantPermits pulled and inspected
Quality GuaranteedBuilt to last. Built right.
1

Panel & Grounding Assessment

We confirmed breaker space, service size, and panel condition, then inspected the grounding electrode system the SPD depends on — electrodes, bonding, and connections — before any work began.

electrician inspecting grounding electrode — Whole House Surge Protection — Downtown Raleigh, NC
2

SPD Installation

The Type 2 device was mounted adjacent to the panel and connected through a dedicated two-pole breaker with the shortest possible lead length — the single biggest factor in real clamping performance.

SPD wired to dedicated breaker — Whole House Surge Protection — Downtown Raleigh, NC
3

Testing & Walkthrough

We verified the status indicators, explained what each light means, showed the homeowner what to check after major storms, and registered the manufacturer’s connected-equipment warranty.

SPD status lights green — Whole House Surge Protection — Downtown Raleigh, NC

Permits Pulled. Inspection Passed. Done Right.

This upgrade is built to NEC code and inspected by the City of Raleigh for your peace of mind.

Inspection Passed
Project Documentation

Final Installation Photos

These photos showcase the completed whole-house surge protection installation at a downtown Raleigh, NC residence.

Completed Upgrade Type 2 whole-home SPD system
Code Compliant Permits pulled and inspection passed
Real Project Click any photo to expand
1 Panel Before SPD (Before)
2 Power-Strip Protection (Before)
3 Grounding Electrode (Before)
4 Bonding Connections (Before)

Code & Safety

Code & Safety Notes

Safety and code compliance are at the core of every project we do. This surge protection install was designed to meet NEC 230.67 and City of Raleigh requirements.

SAFE. COMPLIANT. INSPECTED.Installed to NEC standards and approved by the City of Raleigh.

Listed Type 2 DeviceA listed Type 2 SPD was installed adjacent to the service equipment per NEC 230.67 — the code-recognized first line of whole-home surge defense.
Short-Lead InstallationLead conductors were kept as short and straight as possible per manufacturer instructions (NEC 110.3(B)) — every extra inch raises the voltage that reaches your electronics.
Grounding & BondingThe grounding electrode system was verified and tightened per NEC 250.50 — surge current has to discharge somewhere, and the SPD depends on this path.
Permit & City InspectionAn electrical permit was pulled prior to work. The completed installation passed final inspection by the City of Raleigh, confirming compliance with all applicable codes.

Built to Code. Built to Protect.

This installation meets or exceeds NEC standards and local code requirements for long-term safety and reliability.

Inspection PassedCity of Raleigh
Installation Value

What Was Included With This Upgrade

A complete surge protection install includes more than mounting a device. From grounding verification to professional installation, testing, cleanup, and documentation, we deliver a safer, cleaner, inspection-ready electrical system you can trust.

Site EvaluationPanel condition, breaker space, service size, and grounding were reviewed before work began.
Permit & Inspection SupportThe project was handled with City of Raleigh permit and final inspection requirements in mind.
SPD & Breaker EquipmentListed Type 2 SPD and dedicated two-pole breaker were installed.
Breaker LabelingThe SPD breaker was labeled and the panel directory updated.
System TestingStatus indicators were verified and protection health confirmed.
Cleanup & WalkthroughThe homeowner walkthrough covered indicators, storm checks, and the registered warranty.

Complete upgrade package: evaluation, equipment, installation, testing, cleanup, and final inspection support.

Related Service

Want Whole-Home Surge Protection?

This project connects directly to our whole-house surge protection service. If your home relies on power strips to guard its electronics, this service page explains the options and process.

View Surge Protection Services

Service Covers

  • Type 2 SPD installation
  • Grounding verification
  • Connected-equipment warranties
Licensed electricians
Raleigh & Triangle Area
Code-conscious installations